Open Or Short Check
- Ignition "OFF" & Engine "OFF".
- Disconnect the HECU connector.
- Measure resistance between ground terminal of the HECU harness connector and chassis ground.
Specification : Approx. below 1Ω
- Is the measured value within specifications?
YES:
- Substitute with a known-good HECU and check for proper operation.
If problem is corrected, replace HECU and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO:
- Repair open or short in ground circuit between HECU harness connector and chassis ground, and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Substitute with a known-good HECU and check for proper operation.