Clutch System: General: Specifications: Lubricants
LUBRICANT SPECIFICATION
| Items | Specified lubricants | Quantity |
|---|---|---|
| Contact surface of release bearing and fulcrum of clutch release fork | CASMOLY L 9508 | As required |
| Inner surface of clutch release bearing | CASMOLY L 9508 | As required |
| Inner surface of clutch release cylinder and outer circumference of piston and cup | Brake fluid DOT 3 or DOT 4 | As required |
| Inner surface of clutch disc spline | CASMOLY L 9508 | 0.2 gr. |
| Inner surface of clutch master cylinder and outer circumference of piston assembly | Brake fluid DOT 3 or DOT 4 | As required |
| Clutch master cylinder push rod, clevis pin and washer | Wheel bearing grease SAE J310, NLGI No.2 | As required |
| Clutch pedal shaft and bushings | Chassis grease SAE J310a, NLGI No.1 | As required |
| Contact portion of release fork to release cylinder push rod | CASMOLY L 9508 | As required |
| Input shaft spline | CASMOLY L 9508 | As required |