To Adjust The Zone Setting:
- Determine the desired Zone Number based upon your current location on the Zone Maps below. (See Figure)
- Press and hold the Feature Control button (A) for more than 6 but less than 9 seconds, the current Zone Number will appear on the display.
- Pressing and holding the Feature Control button again will cause the numbers to increment (Note: they will repeat (...13, 14, 15, 1, 2,..). Releasing the button when the desired Zone Number appears on the display will set the new Zone.
- Within about 5 seconds the compass will start displaying a compass heading again.
There are some conditions that can cause changes to the vehicle magnets. Items such as installing a ski rack or a CB antenna or even some body repair work on the vehicle can cause changes to the vehicle's magnetic field. In these situations, the compass will need to be re-calibrated to quickly correct for these changes