LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tiburon SE >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Front Stabilizer Bar >> Installation

Front Stabilizer Bar: Installation

  1. Install the bushing on the stabilizer bar.
    NOTE:
    1. When installing the stabilizer bar, follow the identification color (ID color) as below. 
      STABILIZER BAR ID COLOR DIAMETER REFERENCE

      Model ID color Outer diameter
      2.0L Sports (HARD) - 21.8mm (0.86 in.)
      2.0L Normal (SOFT) White 18.8mm (0.74 in.)
      2.7L Sports (HARD) Yellow 21.8mm (0.86 in.)
      2.7 Normal (SOFT) Red 18.8mm (0.74 in.)

      ID : Identification

    2. Position the bushing on the outside of the stabilizer bar clamp so as to install it.
      3. Fig 1: Stabilizer Bar Identification Color, Clamp & Bushing
      G03850025Courtesy of HYUNDAI MOTOR CO.
    3. Let the selection of the bushings be able to be decided by customers.
  2. Install the bracket on the bushing.
  3. After tightening the bolts of the bushing bracket temporarily, install the bushing bracket on the opposite side.
scientia non olet · About LEMON Manuals