Spark Plug Cable Inspection

Remove suspect cylinder's spark plug cable.
Visually/physically inspect the following items:
- Damage, crack and flashover
Measure the resistance of the spark plug cable referring to specification.
Specification: Spark plug cable (kΩ): 5.6kΩ/m +/- 20%

NOTE: Resistance should not be higher than 10,000 per foot of cable. If resistance is higher than specification, replace the cable.
Is resistance within the specification?
YES:
- Go to "SPARK PLUG INSPECTION " procedure.
NO:
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.