Fuel Injector Inspection
- Check the fuel injectors for clogging or any restrictions.
Test Condition: Ignition "OFF".
Specification: No clogging and restriction.
- Is the fuel injector OK?
YES:
- Visually/physically inspect the engine mechanical problem below:
- Bent push rods.
- Leaky or sticky valves or rings.
- Excessive valve deposits.
- Weak valve spring.
- Leaking head gasket.
If NG, repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
If OK, go to "IGNITION COIL INSPECTION " procedure.
NO:
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Visually/physically inspect the engine mechanical problem below: