DTC P1500: Vehicle Speed Sensor: DTC Detecting Condition

DTC DETECTING CONDITION

Item		Detecting Condition & Fail Safe	Possible cause
Case 1	DTC Strategy	Plausibility check	Open or short in harness Contact resistance in connectors Faulty wheel speed sensor
	Enable Conditions	Engine speed >2100rpm Engine load > 250 mg/rev Coolant temperature > 60°C(140°F) 10V < Battery voltage < 16V No fuel shut-off
	Threshold value	Vehicle speed=0 with high engine speed and engine load
	Diagnostic Time	60 seconds
Case 2	DTC Strategy	Electrical check
	Enable Conditions	Vehicle speed > 0 10V < Battery voltage < 16V
	Threshold value	PCM detects abnormal input voltage of the signal circuit
	Diagnostic Time	10 seconds

Refer to ENGINE CONTROL MODULE (ECM) Diagnosis Procedure for 2.0 Refer to ENGINE CONTROL MODULE (ECM) Diagnosis Procedure for 2.7.