Section 2 (Charging System): Alternator: Disassembly

WARNING: This page is about a different car, the 2006 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the alternator cover (A) using a screw driver (B).

Fig 1: Removing Alternator Cover With Screw Driver
Courtesy of HYUNDAI MOTOR CO.
Loosen the mounting bolts(A) and disconnect the brush holder assembly(B).

Fig 2: Identifying Mounting Bolts And Brush Holder Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide(A).

Fig 3: Identifying Slip Ring Guide
Courtesy of HYUNDAI MOTOR CO.
Remove the nut, pulley(A) and spacer.

Fig 4: Removing Nut, Pulley And Spacer
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 through bolts(A).

Fig 5: Identifying Alternator Bolts
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor(A) and cover(B).

Fig 6: Identifying Rotor And Cover
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse order of disassembly.