Heater Control Unit Replacement

WARNING: This page is about a different car, the 2006 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.

After disconnecting the connector (A), remove the center facia lower panel (B).

Fig 1: Identifying Center Facia Lower Panel With Clip Location
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Identifying Connector
Courtesy of HYUNDAI MOTOR CO.
Loosening the heater control mounting screw, remove heater control unit (C).

Fig 3: Identifying Heater Control Unit With Mounting Screw Location
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.