Throttle Position Sensor (TPS)
- Start engine and connect Hi-Scan (Pro) to data link connector.
- Inspect TPS signal output with Hi-Scan (Pro) on condition as below.
Specification
< TPS1>
Idle : 0.3 ~ 0.7V
Wide open throttle : 4.45 ~ 4.85V
< TPS2>
Idle : 4.3 ~ 4.7V
Wide open throttle : 0.15 ~ 0.55V
- Stop engine and disconnect throttle body assembly connector.
- Measure resistance as below.
Specification
Between pin 1 and 2: 0.88 ~ 1.63kΩ