Accelerator Position Sensor (APS)
- Disconnect APS connector and turn ignition switch on.
- Measure voltage between the terminals 2 and 5 of APS connector as below.
Specification (APS1)
Not depressed : 0.58 ~ 0.93V
Depressed fully : 3.85 ~ 4.35V
- Measure voltage between the terminals 3 and 6 of APS connector as below.
Specification (APS2)
Not depressed : 0.29 ~ 0.46V
Depressed: fully : 1.93 ~ 2.18V