Component Inspection: Notes
NOTE:
It is necessary to perform the TPS adaptation procedure with Scan tool when the throttle body assembly or ECM is replaced.
TPS adaptation procedure
- Erase previous TPS adaptation value using Scan tool.
- Ignition "OFF" and then "ON" without cranking. Wait for 10 seconds under enable conditions
- Enable conditions: Battery) 10V & Intake Air Temp. > 5.3°C (41.5°F) & 5.3°C (41.5°F) (Engine Coolant Temp. <99.8°C (211.6°F)
- After TPS adaptation, the system normality should be confirmed by reading out "FMY" on the Scan Tool