LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6DA-GSL 3.3) >> Fuel Delivery System >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

  1. Turn ignition switch off and disconnect the battery (-) cable from the battery.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Locating Accelerator Position Sensor Connector
    G05349403Courtesy of HYUNDAI MOTOR CO.
  3. Unfasten the mounting nuts (B) and remove the accelerator pedal from the vehicle.
scientia non olet · About LEMON Manuals