LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Santa Fe Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6DA-GSL 3.3) >> Fuel Delivery System >> Filler-Neck Assembly >> Removal

Filler-Neck Assembly: Removal

  1. Disconnect the fuel filler hose (A) and the leveling tube quick-connector (B).
    Fig 1: Locating Fuel Filler Hose And Leveling Tube Quick-Connector
    G05349400Courtesy of HYUNDAI MOTOR CO.
  2. Open the fuel filler door and unfasten the filler-neck assembly mounting screws (A).
    Fig 2: Locating Filler-Neck Assembly Mounting Screws
    G05349922Courtesy of HYUNDAI MOTOR CO.
  3. Remove the rear-LH wheel & tire, and the inner wheel house (Refer to DRIVESHAFT in this SERVICE MANUAL).
  4. Remove the bracket mounting nut (A) and remove the filler-neck assembly.
    Fig 3: Locating Bracket Mounting Nut
    G05349402Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals