LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Santa Fe GLS, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6EA-GSL 2.7) >> Gasoline Engine Control System >> Intake Air Temperature Sensor (IATS) >> Inspection >> Component Inspection

Component Inspection

  1. Turn ignition switch OFF.
  2. Disconnect IATS connector.
  3. Measure resistance between IATS terminals 4 and 5.
    Fig 1: Measuring Resistance Between IATS Terminals 4 And 5
    G05348878Courtesy of HYUNDAI MOTOR CO.
  4. Check that the resistance is within the specification.

    Specification: Refer to SPECIFICATION .

scientia non olet · About LEMON Manuals