LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Santa Fe GLS, AWD, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> ESC (Electronic Stability Control) System >> Esp/ESC System >> DTC C1702 Variant Coding Error >> Monitor SCANTOOL Data >> Variant Code

Variant Code

  1. Check for improper installation of EMS/PCM (ECM & TCM)/ESC.
  2. Connect scantool to Data Link Connector (DLC).
  3. Ignition "ON".
  4. Go in Anti-Lock brake system (figure 1).
  5. Perform variant code.
  6. Disconnect scantool.
  7. Ignition "OFF" and then ignition "ON". Go to "COMPONENT INSPECTION " Procedure.
    Fig 1: Scan Tool Display - Variant Coding
    G05350790Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals