Sensor And Actuator Function
SENSOR AND ACTUATOR FUNCTION REFERENCE
| ITEM | FUNCTION |
|---|---|
| Input shaft speed sensor | Detect the input shaft rpm (TURBINE RPM) at the OD/RVS retainer |
| Output shaft speed sensor | Detect the output shaft rpm (T/F DRIVE GEAR RPM) at the T/F drive gear |
| Engine rpm signal | Receive the engine rpm via CAN communication with ECM |
| Fluid temperature sensor | Detect the temperature of ATF through the thermistor |
| Brake switch | Detect the brake operation at the contact switch of the brake pedal |
| Inhibitor switch | Detect the position of select lever through the contact switch |
| ON/OFF solenoid valve | Control the hydraulic passage for the shift control |
| VFS solenoid valve | Change the line pressure from 4.5 bar to 10.5 bar according to throttle open angle and shift ranges |
| PCSV-A | Control the OD or L/R hydraulic pressure to the pressure control valve for shift control |
| PCSV-B | Control the 2/4 or REV hydraulic pressure to the pressure control valve for shift control |
| PCSV-C | Control the UD hydraulic pressure to the pressure control valve for shift control |
| PCSV-D | Control the hydraulic pressure for the damper clutch control |
| Torque reduction operation signal | Receive the signal of engine reduction pressure operation from ECM via CAN communication |
| Cluster | Send the signal of the current position of shift lever and vehicle speed and operate the lamp, distance meter and speed meter |