LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Elantra Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System & Switch >> Ignition System >> Ignition Switch >> Removal

Ignition Switch: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the shroud (Steering column cover).
  3. Remove the ignition switch (A) after loosening the screw (B) with IG ON and disconnecting the 6-pin connector (C).
    Fig 1: Identifying Ignition Switch & Screw
    G00229412Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Identifying Connector Location
    G00229413Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the steering column cover.
  5. Remove the door warning switch and key illumination lamp (A) after loosening the screw and disconnecting the 6-pin connector.
    Fig 3: Locating Door Warning Switch & Key Illumination Lamp
    G00229414Courtesy of KIA MOTORS AMERICA, INC.
  6. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder (A) after pushing lock pin (B) with key in ACC position.
    Fig 4: Locating Key Lock Cylinder & Lock Pin
    G00229415Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals