LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Azera GLS >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Front Upper Arm >> Removal

Front Upper Arm: Removal

  1. Loosen the wheel nuts slightly.

    Raise the front of the vehicle, and make sure it is securely supported.

  2. Remove the front wheel and tire (A) from front hub (B).
    Fig 1: Identifying Front Wheel, Tire And Front Hub
    G04880366Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Be careful not to damage the hub bolts (C) when removing the front wheel and tire (A).
  3. Remove the upper arm ball joint self-locking nut (A) and the snap pin (B).
    Fig 2: Identifying Upper Arm Ball Joint Self-Locking Nut And Snap Pin
    G04880397Courtesy of HYUNDAI MOTOR CO.
  4. Using the special tools (09568-4A000), disconnect the upper arm ball joint (B) from the knuckle (A).
    Fig 3: Identifying Upper Arm Ball Joint And Knuckle
    G04880398Courtesy of HYUNDAI MOTOR CO.
  5. Remove the front strut assembly (Refer to FRONT STRUT ASSEMBLY ).
  6. Remove the two upper arm mounting bolts (A) from the body.
    Fig 4: Identifying Upper Arm Mounting Bolts
    G04880399Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals