LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Azera GLS >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Front Stabilizer Bar >> Removal

Front Stabilizer Bar: Removal

  1. Loosen the wheel nuts slightly. Raise the front of the vehicle, and make sure it is securely supported.
  2. Remove the front wheel and tire (A) from front hub (B).
    Fig 1: Identifying Front Wheel, Tire And Front Hub
    G04880366Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Be careful not to damage the hub bolts (C) when removing the front wheel and tire (A).
  3. Remove the stabilizer link (B) from the fork (A).
    Fig 2: Identifying Front Stabilizer Link Nut And Fork
    G04880368Courtesy of HYUNDAI MOTOR CO.
  4. After removing both sides of the tie rod end self-locking nuts (A), remove the ball joint by using the special tool (09568-4A000).
    Fig 3: Identifying Tie Rod End Self-Locking Nuts
    G04880407Courtesy of HYUNDAI MOTOR CO.
    Fig 4: Identifying Special Tool (09568-4A000)
    G04880408Courtesy of HYUNDAI MOTOR CO.
  5. Remove both sides of the lower arm mounting bolts (A).
    Fig 5: Identifying Knuckle Bolts
    G04880264Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Be careful not to damage to the bolts (A).
  6. Remove both sides of the connecting bolts (A) between the lower arm and the fork.
    Fig 6: Identifying Lower Arm And Fork Connecting Bolts
    G04880410Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Be careful not to damage to the aluminum lower arm.
  7. Remove the connecting bolt (A) between the steering universal joint assembly and the pinion assembly.
    Fig 7: Identifying Steering Universal Joint Assembly Connecting Bolt
    G04880411Courtesy of HYUNDAI MOTOR CO.
  8. Remove the engine mounting bolts (A, B)
    Fig 8: Identifying Engine Mounting Bolts
    G04880412Courtesy of HYUNDAI MOTOR CO.
  9. Remove the eight bolts and nuts of the sub frame by supporting it with a jack.
    Fig 9: Identifying Sub Frame Bolts And Nuts
    G04880413Courtesy of HYUNDAI MOTOR CO.
  10. After lowering the jack which supports the sub frame in a proper level, remove both sides of the stabilizer bar assembly mounting bolts (A).
    Fig 10: Identifying Stabilizer Bar Assembly Mounting Bolts
    G04880414Courtesy of HYUNDAI MOTOR CO.
  11. Remove the stabilizer bar assembly through the gap between the body and the rear side of the sub frame.
    CAUTION: Be careful not to damage to the power steering related tubes.
  12. Remove the brackets (A) and the bushings (B).
    Fig 11: Identifying Bushings And Brackets
    G04880415Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals