LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Accent SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Interior) >> Crash Pad >> Replacement >> Heater Control Unit Replacement

Heater Control Unit Replacement

WARNING: This page is about a different car, the 2006 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio assembly (See AUDIO ASSEMBLY REPLACEMENT  ).
  2. Loosen the screws.
  3. Remove the heater control unit (A).
    Fig 1: Removing Heater Control Unit
    G03764276Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
    NOTE: Make sure the connector is plugged in properly.
scientia non olet · About LEMON Manuals