Automatic Transaxle Control System: Disassembly: Notes

Remove the push button(A) from the knob sub assembly.

Fig 1: Identifying Push Button Of Knob Sub Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the knob sub assembly from the lever sub assembly. (Screw: 1EA)

Fig 2: Identifying Knob Sub Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the indicator assembly(A).

Fig 3: Identifying Indicator Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the detent spring(A). (Bolt: 1EA)

Fig 4: Identifying Detent Spring
Courtesy of HYUNDAI MOTOR CO.
Loosen the bracket sub assembly nut(A).

Fig 5: Identifying Bracket Sub Assembly Nut
Courtesy of HYUNDAI MOTOR CO.
Remove the screw.

Fig 6: Identifying Bracket Sub Assembly Screw
Courtesy of HYUNDAI MOTOR CO.
Disassemble the bracket sub assembly(A) after removing the cotter pin (2EA).

Fig 7: Identifying Bracket Sub Assembly
Courtesy of HYUNDAI MOTOR CO.
Disassemble the hinge shaft from the lever sub assembly.

Fig 8: Identifying Hinge Shaft Of Lever Sub Assembly
Courtesy of HYUNDAI MOTOR CO.