LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Accent GLS, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Front Strut Assembly >> Removal

Front Strut Assembly: Removal

  1. Loosen the wheel nuts slightly.

    Raise the front of the vehicle, and make sure it is securely supported.

  2. Remove the front wheel and tire (A) from front hub (B).
    Fig 1: Identifying Front Wheel & Tire
    G04802307Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Be careful not to damage the hub bolts (C) then remove the front wheel and tire (A). 
  3. Remove the brake hose bracket (B) and speed sensor wire mounting bolt (C) from the strut assembly (A).
    Fig 2: Identifying Brake Hose Bracket & Speed Sensor Wire Mounting Bolt
    G04802308Courtesy of HYUNDAI MOTOR CO.
  4. Remove the speed sensor wire mounting bolt (B) and speed sensor (A).
    Fig 3: Identifying Speed Sensor Wire Mounting Bolt & Speed Sensor
    G04802309Courtesy of HYUNDAI MOTOR CO.
  5. Remove the nut (B) from the stabilizer bar link (A).
    Fig 4: Identifying Stabilizer Bar Link
    G04802310Courtesy of HYUNDAI MOTOR CO.
  6. Remove the strut upper mounting nuts (A).
    Fig 5: Identifying Strut Upper Mounting Nuts
    G04802311Courtesy of HYUNDAI MOTOR CO.
  7. Remove the strut lower mounting bolts (A) and then remove the strut assembly (B).
    Fig 6: Identifying Strut Lower Mounting Bolts & Strut Assembly
    G04802312Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals