LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Accent GLS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System (A4AF3)) >> Automatic Transaxle System >> DTC P0707 Transaxle Range Switch - No Input >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Ignition "OFF".
  2. Remove "TRANSAXLE RANGE SWITCH".
  3. Measure the resistance between each terminal of the transaxle range switch.

    Specification: approx. 0 Ω

    Fig 1: Measuring Resistance Between Terminal Of Transaxle Range Switch
    G04802067Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Range Switch Continuity Reference Chart
    G04802068Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within specifications?

    YES  : --> Substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO  : --> Replace "TRANSAXLE RANGE SWITCH" as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals