Section 8 (Charging System): Alternator: Replacement

WARNING: This page is about a different car, the 2006 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative terminal first, then the positive terminal.
Disconnect the alternator connector (A) and "B" terminal cable (B) from the alternator (C).

Fig 1: Disconnecting Alternator Connector & Terminal Cable From Alternator (1 Of 2)
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Disconnecting Alternator Connector & Terminal Cable From Alternator (2 Of 2)
Courtesy of HYUNDAI MOTOR CO.
Remove the adjusting bolt (A) and mounting bolt (B), then remove the alternator belt.
Pull out the through bolt (C), then remove the alternator (D).

Fig 3: Identifying Adjusting Bolt, Mounting Bolt, Through Bolt & Alternator
Courtesy of HYUNDAI MOTOR CO.

Fig 4: Removing Alternator
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
Adjust the alternator belt tension after installation (See GASOLINE (2.7) ).