LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Tucson Limited, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Automatic Transaxle System >> Service Adjustment Procedure >> Vehicle Speed Sensor >> Replacement

Vehicle Speed Sensor: Replacement

  1. Lift up the vehicle.
  2. Remove the vehicle speed sensor (A).
    Fig 1: Identifying Vehicle Speed Sensor
    G04811245Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the vehicle speed sensor connector (B).
    2. Remove the bolt (10 mm (0.4 in)).
    3. Inspect the vehicle speed sensor bore.
  3. Inspect the O-ring for nicks or cut. Install a new O-ring as necessary.
  4. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  5. Install the vehicle speed sensor.
  6. Connect the vehicle speed sensor connector.
  7. Installation is the reverse of removal.