LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Tucson Limited, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Automatic Transaxle System >> Service Adjustment Procedure >> Output Shaft Speed Sensor >> Replacement

Output Shaft Speed Sensor: Replacement

  1. Remove the battery and air cleaner (see REPLACEMENT ).
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor
    G04811244Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
  3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals