Heater Control Unit Replacement

After disconnecting the connector (A), remove the center facia lower panel (B).

Fig 1: Identifying Center Facia Lower Panel With Clip Location
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Identifying Connector
Courtesy of HYUNDAI MOTOR CO.
Loosening the heater control mounting screw, remove heater control unit (C).

Fig 3: Identifying Heater Control Unit With Mounting Screw Location
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.