LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Santa Fe Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6CU-GSL 3.5) >> Gasoline Engine Control System >> Engine Coolant Temperature Sensor (ECTS) >> Installation

Engine Coolant Temperature Sensor (ECTS): Installation

  1. Apply sealant LOCTITE 962T or the equivalent to the threaded portion.
  2. Install the engine coolant temperature sensor and tighten it to the specified torque.

    Tightening torque 

    Engine coolant temperature sensor:

    20~40 Nm (200~400 kg.cm, 14-29 lb.ft)

  3. Securely connect the harness connector.
scientia non olet · About LEMON Manuals