LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Santa Fe GLS, 2.7 D, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2.7L) (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0630 VIN Not Programmed Or INCOMPACTIBLE-ECM/Pcm >> System Inspection

System Inspection

  1. Was the ECM just replaced or reflashed?

    YES: 

    • Using a scan tool, perform "VIN WRITING" procedure. Refer to the latest reference manual for scan tool and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO: 

    • Using a scan tool, read VIN information.

    If there is no proper VIN information, perform "VIN WRITING" procedure.

    If VIN information exists, substitute with a known-good ECM and check for proper operation. If the problem.

    And go to "VERIFICATION OF VEHICLE REPAIR " procedure.