Fuel Tank: Installation

Confirm that the pad is fully bonded to the fuel tank, and install the fuel tank by tightening the self-locking nuts.

Fig 1: Identifying Fuel Tank Bands
Courtesy of HYUNDAI MOTOR CO.
Connect the leveling hose to the tank and the filler neck. Insert approximately 40mm (1.6 in.).
When connecting the filler hose (A), the end with the shorter straight pipe should be connected to the tank side.

Fig 2: Identifying Dimension Of Filler Pipe Side
Courtesy of HYUNDAI MOTOR CO.
Connect the vapor hose. When attaching the vapor hose to the line, be sure that the hose is attached as shown in the illustration.

Fig 3: Identifying Vapor Hose To Line
Courtesy of HYUNDAI MOTOR CO.
Connect the high pressure hose to the fuel pump. Make sure that the fuel hose does not twist.
Connect the electrical fuel pump connector.