LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> XG350 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> Ignition System >> Ignition System >> Spark Plug Cable >> Inspection

Spark Plug Cable: Inspection

  1. Carefully remove the spark plug cable by pulling on the rubber boots.

    Check the condition of the spark plug cable terminals, if any terminal is corroded, clean it, and if it broken or distorted, replace the spark plug cable.

    Fig 1: Inspecting Spark Plug Cable Boots
    G00721195Courtesy of HYUNDAI MOTOR CO.
  2. Connect the ohmmeter probes and measure resistance.

    Resistance:  5.6KΩ/m +/- 20

    Fig 2: Measuring Spark Plug Cable Resistance
    G00721196Courtesy of HYUNDAI MOTOR CO.
  3. Resistance should not be higher than 10KΩ per foot of cable.

    If resistance is higher, replace the cable.

scientia non olet · About LEMON Manuals