Specifications (Esp)

BRAKE SPECIFICATIONS (ESP)

PART	ITEM		STANDARD VALVE	REMARK
HECU (Hydraulic and Electronic Control Unit)	System		4 channel 4 sensor (MGH-25)	ABS system: ABS & EBD control FTCS system: ABS & EBD control (Both Brake and Engine control)
	Type		Motor, valve relay integrated type
	Operating voltage		10V~16V(DC)
	Operating temperature		-40~110°C(-40~230°F)
	Motor power		250W
	Pump orifice		Diameter 0.5mm(0.0197 in.)
	Accumulator capacity	LPA	MCS: 3.0cc/MC3.0cc	LPA: Low pressure accumulator
	Accumulator capacity	HPA	0.13cc	HPA: High pressure accumulator
	Valve	Inlet valve (NO)	Front: diameter 0.71mm (0.0280in.) Rear: diameter 0.315mm (0.0124 in.)	NO valve: 4
	Valve	Outlet valve (NC)	Front: diameter 0.56mm (0.0220 in.) Rear: diameter 0.355mm (0.0140 in.)	NC valve: 4
	Traction Control valve relief pressure		120~150bar	With TCS
Warning lamp	Operating voltage		12V	ABS W/L: ABS failure Brake W/L: Parking, brake oil, EBD failure ESP W/L: ESP failure
Warning lamp	Current consumption		80mA
Active wheel speed sensor	Supply voltage		DC12V
	Operating temperature		-40~120°C
	Output current low		5.9~8.4mA
	Output current high		11.8~16.8mA
	Frequency range		1~2000HZ
	Airgap		0.5~1.5mm
Steering Wheel Angle Sensor	Operating Voltage
	Current		9V~16V
	Consumption		Max 100mA
	High output voltage		3.0V~4.1V
	Low output voltage		1.3V~2.0V
	Operating		Max1500°/sec
	Angular velocity

NOTE: ESP: Electronic Stability Program