General (Brake System): Specifications: Notes
BRAKE SPECIFICATIONS
| Item | Specification |
|---|---|
| Master cylinder | |
| Type | Tandem type |
| I.D. mm (in.) (CBS/ABS) | 22.22 (0.875) |
| Piston stroke mm(in) | 3.1 (1.22) |
| Output port (CBS/ABS) | 4port/2port |
| Fluid level warning sensor | Provided |
| Proportioning valve | 15Kgf/cm2 |
| Cut-in pressure (Split point) | 0.27: 1 (2WD) |
| Decompression ratio | 0.32: 1 (4WD) |
| Brake booster | |
| Type | Vacuum |
| Effective dia. mm (in.) | 8+9 in |
| Boosting ratio | 9: 1 |
| Front brake (Disc) | |
| Type | Floating type with ventilated disc |
| Disc O.D. | 280 mm |
| Disc I.D. | 172 mm (6.77 in.) |
| Disc thickness | 26 mm |
| Pad thickness | 11 mm |
| Cylinder type | single piston |
| Cylinder I.D. | 60 mm (2.36 in.) |
| Rear brake (Disc) | |
| Type | Floating type with solid disc |
| Disc O.D. (2WD/4WD) | 262/284 mm (10.31/11.18 in.) |
| Disc thickness | 10 mm (0.39in) |
| Pad thickness | 10 mm (0.39 in) |
| Cylinder type | single piston |
| Cylinder I.D. | 34 mm (1.34 in.) |
| Parking brake | |
| Type | V type |
| Actuation | Mechanical brake acting on rear wheels |
| Cable arrangement | Lever |
| O.D=Outer Diameter I.D=Inner Diameter CBS = Conventional Brake System |
|