LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tucson GL, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System) >> Shift Lever >> Removal

Shift Lever: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the shift lever knob (A).
    Fig 1: Removing Shift Lever Knob
    G03763464Courtesy of HYUNDAI MOTOR CO.
  2. Remove the console cover (B), disconnecting the shift lever connector(A).
    Fig 2: Removing Console Cover And Disconnecting Shift Lever Connector
    G03763465Courtesy of HYUNDAI MOTOR CO.
  3. Separate the lever assembly (B) from the fascia bracket assembly(A).
    Fig 3: Separating Lever Assembly From Fascia Bracket Assembly
    G03763466Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the cable interlinked to lever assembly.
  5. In case of 4WD vehicle, disconnect the 4WD ECM connector(A).
    Fig 4: Disconnecting 4WD ECM Connector
    G03763467Courtesy of HYUNDAI MOTOR CO.
  6. Remove the fascia bracket assembly.
scientia non olet · About LEMON Manuals