Tightening Torque

TIGHTENING TORQUE SPECIFICATIONS

Items	Nm	kgf.cm	lbf.ft
Wheel nut	90~110	900~1100	67~82
Driveshaft nut 2.0L 2.7L	200~260 200~280	2000~2600 2000~2800	148~192 148~207
Front strut upper installation nut	45~60	450-600	33~44
Front strut assembly to knuckle	140~160	1400~1600	104~118
Front strut mounting self-locking nut	50~70	500~700	37~51
Lower arm ball joint to knuckle	60~72	600~720	43~52
Lower arm bushing (A) mounting bolt	130~150	1300~1500	96~111
Lower arm bushing (G) mounting bolt	130~150	1300~1500	96~111
Stabilizer bar bracket mounting bolt	30~45	300~450	22~33
Tie rod end ball joint to knuckle	24~34	240~340	18~25
Tie rod end lock nut	50~55	500~550	37~41
Stabilizer link nut	35~45	350~450	26~33
Rear strut upper mounting nut	30~40	300~400	22~30
Rear strut lower mounting nut	110~130	1100~1300	81~96
Rear strut mounting self locking nut	40~60	400~600	30~44
Rear stabilizer link to stabilizer bar	35~45	350~450	26~33
Rear stabilizer bar bracket bolt	17~26	170~260	13~19
Rear suspension arm tie rod nut	50~60	500~600	37~43
Rear suspension arm (A, B) mounting bolt	160~180	1600~1800	118~133
Rear cross member mounting bolt	100~120	1000~1200	74~88
Trailing arm to bracket nut	40~50	400~500	30~37
Trailing arm bracket to body frame	40~50	400~500	30~37
Trailing arm mounting	100~120	1000~1200	74~88

CAUTION: Replace the self-locking nuts with new ones after removal.