Can Communication Codes (05-40-003)
WARNING: This page is about the Tiburon GS, Automatic, which is a different variant/trim than selected.
Publication date: 2005-04-01Reference number: 05-40-003
CAN COMMUNICATION CODES
TECHNICAL SERVICE BULLETIN
Reference Number(s): 05-40-003, Date of Issue:
APRIL, 2005
| HYUNDAI: | 2005 SONATA, 2005 TIBURON, 2005 TUCSON |
| GROUP: | TRANSAXLE |
DESCRIPTION
Communication lines exist between the engine control module (ECM), transaxle control module (TCM) and ABS module (if equipped). The communication is through a Control Area Network (CAN) which uses only two lines between each control module.
Several new diagnostic trouble codes (DTC) were established for some 2005 MY vehicles. These DTCs are provided below with shop manual reference pages for your information.
DTC CODE DESCRIPTION
| DTC CODE | DESCRIPTION | SHOP MANUAL REFERENCE PAGE | |||||
|---|---|---|---|---|---|---|---|
| 2005 SONATA | 2005 ELANTRA | 2005 TIBURON | 2005 SANTA FE | 2005 XG350 | 2005 TUCSON | ||
| U0001 | CAN communication BUS OFF | TR-16, TR-19 | No reference | AT-146 | No reference | No reference | No reference |
| U0100 | CAN-time out ECM | TR-16, TR-19 | No reference | AT-148 | No reference | No reference | No reference |
| U0101 | Serial communication problem with TCM (timeout) | FLA-77 | No reference | FLA-41, AT-146 | No reference | No reference | FLA-49 |