DTC P0340 Camshaft Position Sensor A Circuit Malfunction (Single Sensor): DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition	Possible Cause
DTC Strategy	Check camshaft signal switching	Open or short in signal, ground or power supply circuit Contact resistance in connectors Misadjusted crankshaft and camshaft pulley position Faulty CMP sensor
Enable Conditions	No Crankshaft Position Sensor signal error
Threshold Value	No signal switching Rising/falling camshaft edge not within defined window: -5 ~ +5 teeth
Diagnostic Time	80 revolutions
MIL On Condition	2 Driving Cycles