Specification (Abs)
SPECIFICATIONS (ABS)
| PART | ITEM | STANDARD VALUE | REMARK | |
|---|---|---|---|---|
| HECU (Hydraulic and Electronic Control Unit | System | 4 channel 4 sensor (MGH-25) |
|
|
| Type | Motor, valve relay integrated type | |||
| Operating voltage | 10V~16V(DC) | |||
| Operating temperature | -40~110°C(-40~230°F) | |||
| Motor power | 180W | |||
| Pump orifice | 0.5mm(0.0197in.) | |||
| Accumulator capacity | LPA | MCS:3.0cc/MCP:3.0cc | LPA: Low pressure accumulator | |
| HPA | 0.13cc | HPA: High pressure accumulator | ||
| Valve | Inlet valve (NO) | Front:
0.71mm (0.0280 in.) Rear: 0.40mm (0.0157in.) |
NO valve: 4 | |
| Outlet valve (NC) | Front:
0.56mm (0.0220 in.) Rear: 0.355mm (0.0140 in.) |
NC valve: 4 | ||
| Warning lamp | Operating voltage | 12V |
|
|
| Current consumption | 80mA | |||
| Active wheel speed sensor (ABS) | Supply voltage | DC 12V | ||
| Output current low | 5.9~8.4mA | Type7mA | ||
| Output current High | 11.8~16.8mA | Type14mA | ||
| Frequency range | 1~2000HZ | |||
| Air gap | 0.2~1.5mm (0.008~0.0591 in.) |
|||
| Tone wheel | 44 teeth | |||