| DTC Strategy |
- Calculation of engine roughness
|
- Faulty spark plugs, high-tension lead, or Ignition coil
- Incorrect valve timing
- Uneven compression
- Air leakage
- Improper Fuel pressure or dirty fuel.
- Blocked/Leaking injectors
- Leakage between cooling system and cylinder
|
| Enable Conditions |
- 170 < Mass air flow(mg/rev.) < 460
- 512 < Engine speed(RPM) < 6500
- 40 < MAF gradient(mg/rev/Seg.) < 400
- 140 < Throttle gradient(°TPS/sec.) < 200
- Coolant temperature > 20°C if Start temperature < -7°C
- No rough road
- No relevant failure
- 11V< Battery voltage< 16V
|
| Case1) |
Threshold Value |
- Misfire = 12~54% within 200 rev.
|
| Diagnosis Time |
- 200 revolution or 3*200 revolution
|
| Case2) |
|
- Misfire > 2% within 1000 revolutions for SULEV
- Misfire >1.3% within 1000 revolutions for ULEV
|
| Diagnosis Time |
- 1000 revolution or 4*1000 revolution
|