Component Inspection
- Ignition "OFF" & Engine "OFF"
- Remove the fuel pump relay.
- Apply 12V and a ground to 5 and 3 of the fuel pump relay(Component side).
- Check if the fuel pump relay works well when it is energized. (If the fuel pump relay works normally, a clicking sound can be heard.)
- Does the fuel pump relay operate normally?
YES
- Go to next step as below.
NO
- Check relay for contamination, deterioration, or damage. Substitute with a known-good relay and check for proper operation. If the problem is corrected, replace relay and then go to VERIFICATION OF VEHICLE REPAIR procedure.