LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Accent GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System) >> Shift Lever >> Reassembly

Shift Lever: Reassembly

WARNING: This page is about a different variant/trim than selected.
  1. Apply a coating of grease to the sliding part of the bushing.

    Specified grease: 

    Chassis grease SAE J310, NLGI No.2

    Fig 1: Applying Coating Of Grease To Sliding Part Of Bushing
    G03852368Courtesy of HYUNDAI MOTOR CO.
  2. Apply the specified grease at the places shown in the figure.

    Specified grease: 

    Multipurpose grease SAE J310, NLGI No.2

    Fig 2: Applying Specified Grease To Specified Points
    G03852369Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals