LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Accent GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System) >> DTC Troubleshooting Procedures >> DTC P0707 & P0708 >> Troubleshooting Guide

Troubleshooting Guide

WARNING: This page is about a different variant/trim than selected.
TROUBLESHOOTING GUIDE

Detection condition Possible cause Check item
  1. No signal is continuous for > 30 seconds
  2. Above 2 signals are continuous for > 30 seconds
    • Engine speed greater than or equal to 600rpm
  • Malfunction of TR switch
  • Malfunction of connector
  • Malfunction of PCM
  • Harness & connector
  • Transaxle range switch
SYMPTOM 
  • Starting impossible
  • Does not move