LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2004 >> XG350 L >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> MULTIPORT Fuel Injection (MFI) >> Inspection Procedure (Using Generic Scan Tool)

Inspection Procedure (Using Generic Scan Tool)

  1. Turn OFF the ignition switch.
  2. Connect the scan tool to the data link connector on the lower crash pad.
  3. Turn ON the ignition switch.
  4. Use the Hi-Scan Pro to check the diagnostic trouble code.
  5. Repair the faulty part from the diagnosis chart.
  6. Erase the diagnostic trouble code.
  7. Disconnect the Hi-Scan Pro.
    Fig 1: Identifying Scan Tool Diagnostic Connector Terminals/Systems
    G00721279Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals