Power Circuit Test (Accent)
WARNING: This page is about a different car, the 2002 Hyundai XG350, 2002 Hyundai Sonata, 2002 Hyundai Santa Fe, 2002 Hyundai Elantra, and 2002 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect both ignition coils 2-pin harness connectors, see Fig 1. Turn ignition on, and measure voltage between ground and both ignition coils harness connectors terminal No. 1 (Orange wire). Voltage should be battery voltage. If voltage is not as specified, repair open circuit (in Orange wire) between ignition coil and ignition switch. For circuits identification, see WIRING DIAGRAMS article.