Tightening Torque

Torque Specifications

Items	Nm	kgf.cm	lb.ft
Wheel nut	90 ~ 110	900 ~ 1100	67 ~ 81
Drive shaft nut	200 ~ 280	2000 ~ 2800	148 ~ 206
Front upper arm ball joint self-locking nut	35 ~ 45	350 ~ 450	26 ~ 33
Front upper arm shaft nut	55 ~ 65	550 ~ 650	40 ~ 48
Front upper arm mounting nut	80 ~ 100	800 ~ 1000	59 ~ 73
Lower arm ball joint self-locking nut	75 ~ 90	750 ~ 900	55 ~ 66
Lower arm ball joint to knuckle mounting bolt	100 ~ 120	1000 ~ 1200	74 ~ 88
Lower arm to connector nut	100 ~ 120	1000 ~ 1200	74 ~ 88
Lower arm bushing (A) to sub-frame mounting bolt	100 ~ 120	1000 ~ 1200	74 ~ 88
Lower arm bushing (G) to sub-frame mounting bolt	120 ~ 140	1200 ~ 1400	88 ~ 103
Fork lower mounting nut	100 ~ 120	1000 ~ 1200	74 ~ 88
Strut lower mounting bolt	60 ~ 80	600 ~ 800	44 ~ 59
Strut upper mounting nut	45 ~ 60	450 ~ 600	33 ~ 44
Strut mounting self-locking nut	20 ~ 25	200 ~ 250	15 ~ 18
Stabilizer link mounting self-locking nut	35 ~ 45	350 ~ 450	26 ~ 33
Stabilizer bar bracket to sub-frame bolt	30 ~ 45	300 ~ 450	22 ~ 33
Stabilizer bar bracket to crossmember bolt	35 ~ 45	350 ~ 450	26 ~ 33
Center arm to carrier nut	60 ~ 72	600 ~ 720	44 ~ 53
Rear shock absorber lower mounting bolt *	80 ~ 90	800 ~ 900	59 ~ 66
Rear shock absorber mounting self-locking nut	20 ~ 25	200 ~ 250	15 ~ 18
Rear upper arm to rear carrier mounting nut	100 ~ 120	1000 ~ 1200	74 ~ 88
Rear shock absorber mounting stud	100 ~ 120	1000 ~ 1200	74 ~ 88
Rear shock absorber mounting bracket to body mounting bolt	100 ~ 120	1000 ~ 1200	74 ~ 88
Rear upper arm to rear shock absorber mounting bracket	60 ~ 78	600 ~ 780	44 ~ 58
Assist arm to carrier *	100 ~ 120	1000 ~ 1200	74 ~ 88
Assist arm to crossmember nut *	80 ~ 100	800 ~ 1000	59 ~ 73
Center arm to carrier nut	60 ~ 72	600 ~ 720	44 ~ 53
Center arm to crossmember nut	100 ~ 120	1000 ~ 1200	74 ~ 88
Trailing arm to body nut *	140 ~ 160	1400 ~ 1600	103 ~ 118
Trailing arm to carrier nut *	100 ~ 120	1000 ~ 1200	74 ~ 88
Crossmember to body mounting bolt	100 ~ 120	1000 ~ 1200	74 ~ 88
Tie rod end lock nut	50 ~ 55	500 ~ 550	37 ~ 40

CAUTION:

Replace the self-locking nuts with new ones after removal.
The mark '*' indicates the parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in an unladen condition.