LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2004 >> Elantra GLS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System) >> Automatic Transaxle System >> Automatic Transaxle >> On-Vehicle Repair >> Output Shaft Speed Sensor Replacement >> Removal

Output Shaft Speed Sensor Replacement: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Removal of the battery and air cleaner. See TRANSAXLE RANGE SWITCH REPLACEMENT  .
  2. Remove the output shaft speed sensor (A).
    Fig 1: Removing Output Shaft Speed Sensor
    G00747982Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
scientia non olet · About LEMON Manuals