Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2004 Hyundai XG350. However, it is still accessible from the selected car via links, so may be relevant.

When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.

Fig 1: Installing Accelerator Arm Spring
Courtesy of HYUNDAI MOTOR CO.
Apply sealant to the bolt mounting hole and tighten the accelerator arm bracket.
Tightening torque

Accelerator arm bracket bolts:

8~12 Nm (80~120 kg.cm, 6~7 lb.ft)

Fig 2: Identifying Accelerator Cable/Arm Grease Location
Courtesy of HYUNDAI MOTOR CO.
Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.

Fig 3: Installing Accelerator Cable To Accelerator Arm
Courtesy of HYUNDAI MOTOR CO.