LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Tiburon Base, Standard >> Repair and Diagnosis >> Steering >> Mechanical Power Steering System >> General >> Service Adjustment Procedure >> Checking Steering Angle

Checking Steering Angle

  1. Place the front wheel on a turning radius gauge and measure the steering angle.

    Standard value 

    Wheel angle

    1. Inner wheel: 34° 76' +/- 2°
    2. Outer wheel: 30° 19'
    Fig 1: View Of Front Wheel On A Turning Radius Gauge
    G00968639Courtesy of HYUNDAI MOTOR CO.
  2. If the measured value is not within the standard value, adjust the toe and inspect again.
scientia non olet · About LEMON Manuals