LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Tiburon Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 2.0L 4-Cylinder Engine >> Main Moving System >> Camshaft >> Inspection >> Notes

Main Moving System: Camshaft: Inspection: Notes

  1. Check the camshaft journals for wear. If the journals are badly worn, replace the camshaft.
  2. Check the cam lobes for damage. If the lobe is damaged or worn excessively, replace the camshaft.

    Cam height 

    Standard value

    1. Intake: 44.820 mm (1.7646 in.)
    2. Exhaust: 44.720 mm (1.7606 in.)

    Limit

    1. Intake: 44.720 mm (1.7606 in.)
    2. Exhaust: 44.620 mm (1.7567 in.)
    Fig 1: Measuring Camshaft Lobes
    G00973331Courtesy of HYUNDAI MOTOR CO.
  3. Check the cam surface for abnormal wear or damage, and replace if necessary.
  4. Check each bearing for damage. If the bearing surface is excessively damaged, replace the cylinder head assembly or camshaft bearing cap, as necessary.
    1. Camshaft end play: 0.1 - 0.2 mm (0.004 - 0.008 in.)
scientia non olet · About LEMON Manuals